Brushless Electronic speed Controllers
|
For Brushless Motors
Brushless Motors require different ESC
from Brushed motors
Available for 18/25/40 amps
High rate (10 KHz) switching (PWM)
Up to ten NiCd, Ni-MH cells or three
Li-poly cells with three micro servos.
Twelve NiCd, Ni-MH or four Li-poly cells
MAX (with BEC disabled).
Dynamic braking ensures prompt prop folding.
BEC (1.5A) provides power to receiver
and servos -eliminates separate receiver battery.
Over temperature protection.
User Programmable Features.
Low-voltage protection - the value of
low-voltage cutoff can be set.
Cutoff can be programmed for motor stop
or reduced power.
Brake/No Brake operation. Stop folding
props cold ¡ª or let fixed props freewheel.
XMotorTM optimized timing
advance.
Safe ¡°power on¡± arming program ensures
motor will not accidentally turn on.
Low torque ¡°soft start¡± prevents damage
to fragile gearboxes.
Auto shut down in 4sec after when signal
is lost or radio interference becomes severe.
Microprocessor controlled. |
TT18
(18 amps)
Rs 1800/-
___________
ESC 25 amps
Rs 2250/-
|
